Berstoff ZE 90A x 36D

Berstorff ZE 90A x 36D compound extruder

Dynamische Tragzahl: 633 kN(Dynamic Load Capacity)

Theoretische Lebensdauer bei 120 bar und 300 l/min: 40,000 h(Theoretical Lifespan at 120 bar and 300 l/min)

(Siehe Lebensdauerdiagramm, Punkt 8.3.4)(See Lifespan Diagram, Point 8.3.4)

Anzahl der Vollzylinder (4 D): 1(Number of Full Cylinders (4D))

Heizleistung pro Zylinder: 9.2 kW(Heating Power per Cylinder)

Anzahl der offenen Zylinder (4 D): 2(Number of Open Cylinders (4D))

(1x Füllzylinder 4D unbeheizt)(1x Fill Cylinder 4D Unheated)

Heizleistung pro Zylinder: 6.8 kW(Heating Power per Cylinder)

Anzahl der Vollzylinder (6D): 2(Number of Full Cylinders (6D))

Heizleistung pro Zylinder: 18.4 kW(Heating Power per Cylinder)

Anzahl der offenen Zylinder (6D): 1(Number of Open Cylinders (6D))

Heizleistung pro Zylinder: 16.0 kW(Heating Power per Cylinder)

Anzahl der Kombizylinder (6D): 1(Number of Combination Cylinders (6D))

Heizleistung pro Zylinder: 13.6 kW(Heating Power per Cylinder)

Anzahl der Kopfanschlüsse: 1(Number of Head Connections)

Heizleistung der Kopfanschlüsse: 5 kW(Heating Power of Head Connections)

Heizleistung ges.: 94.2 kW(Total Heating Power)

(Die Angaben der Heizleistung gelten bei 400V Spannung)(The heating power specifications apply at 400V voltage)

Electric Drive (Direct Drive

Motor: Gleichstrommotor(Motor: DC Motor)

Fabrikat/ Typ: Siemens 1GG6(Manufacturer/ Type: Siemens 1GG6)

258-ONH40-1WV1-ZLeistung: 395 kW bei 1750 min⁻¹(Power: 395 kW at 1750 min⁻¹)

Überlastschutzkupplung: Hersteller Desch(Overload Clutch: Manufacturer Desch)

Typ PLANOX PPF 142-KADO 08E1Eingestelltes Abschaltmoment bei Luftdruck: 2697 Nm(Pre-set Cut-off Torque at Air Pressure)

5.1 barInduktiver Näherungsschalter: IFM(Inductive Proximity Switch: IFM)

IA-3010-BPKGMax. zulässige Drehzahl: 1750 min⁻¹(Max. Permissible Speed: 1750 min⁻¹)

Drehrichtung: rechts, auf den Motor-(Direction of Rotation: right, viewed on the motor)antriebszapfen gesehen(driven shaft viewed)

Berstorff (Gearbox)

Max. zulässiges Nenndrehmoment pro Abtriebswelle: 5800 Nm

(Max. Permissible Nominal Torque per Output Shaft)

Max. zulässige Antriebsleistung: 425 kW

(Max. Permissible Drive Power)

Übersetzung: i = 4.947

(Gear Ratio)

Max. zulässige Antriebsdrehzahl: 1731 min⁻¹

(Max. Permissible Input Speed)

Max. zulässige Abtriebsdrehzahl: 350 min⁻¹

(Max. Permissible Output Speed)

Ölinhalt: 270 l

(Oil Capacity)

Ölviskosität: ISO VG 320

(Oil Viscosity: ISO VG 320)

Drehrichtung auf Antriebswelle gesehen: links

(Direction of Rotation Viewed on Input Shaft: left)

Drehrichtung auf Abtriebswelle gesehen: links

(Direction of Rotation Viewed on Output Shaft: left)

Max. Schalldruckpegel in 1 m Abstand bei max. Antriebsleistung und max. Drehzahl: < 80 dB (A)

(Max. Sound Pressure Level at 1 m Distance with Max. Drive Power and Max. Speed)

Dryer

Type: TVE 2004SRS

Specification:

Weight: (in operating condition)

Dryer 1100 kg

Operating data:

max. operating pressure 5.5 bar

max. operating temperature 90 °C

Connections:

Process water inlet 3"

Process water outlet 4"

Cleaning water inlet 2"

Electrical connection:

Motorised fan 5.5 kW 400V 50Hz 1.7A IP 55

( Motor-fan 1.5 kW 400V 50Hz 2.4A IP 55

Compressed air connection G1/4" 5.5-6.5 bar

Dimensions See drying system / dryer drawing

Weights of Components

Extruder: 9.7 tons (measured by crane during setup)

Screen changer: 10.2 tons (measured by crane during setup)

Motors for screen changer: 0.45 tons (estimated/from documents)

Side feeder: 0.22 tons (estimated/from documents)

Control cabinets: 0.85 tons (estimated/from documents)

Underwater pelletizer (UWG): 2.6 tons (estimated/from documents)

UWG cutting unit: 0.35 tons (estimated/from documents)

UWG vibrating sieve: 0.28 tons (estimated/from documents)

UWG including cutting unit: 2.6 tons (estimated/from documents)

Control cabinets: 0.85 tons (estimated/from documents)

Spare housing: 0.32 tons (each, with three listed)

Other spare parts: 0.2 tons (estimated/from documents)

Total weight: 29.26 tons

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com