2006 ESAB UXL P EV 2000

2006 ESAB UXL P EV 2000

联系我们了解价格

位置:斯图加特, 德国

描述

Plasma cutting system with accessories

 

The plasma cutting system consists of:

 

1 piece Plasma cutting machine ESAB UXL P EV 2000 built in 2006

 

1 piece Power source Hypertherm Powermax 85

 

1 piece Vision T5 control with touchscreen operation, latest design, built in 2022

 

1 piece Dodek suction table, for large-format support cutting area 1500x3000mm, sequentially flap-controlled, built in 2006

 

1 piece Dodek cyclone suction system with Donaldson suction filter technology, fan suction capacity without resistance approx. 5400m3/h, built in 2006


Plasma system : MAX Series

SCOPE OF SUPPLY:

Retrofit of CNC control

Controller VISION™ T5c


RETROFIT (AT SITE) OF EXISTING 1 PCE

RETROFIT (AT SITE) OF EXISTINGMACHINE


Next Generation Cutting Machine Controller

Retrofit & Modernization of the existing

Basic-Machine and the hereafter offered

Equipment will be done at site.

Estimated working time and time schedule

according to agreement and consultation

of Retrofit dept., details see last page

of this document: conditions.

Before implementing an Retrofit, a survey

at site by an qualified ECS technician

is recommended.


Changes of the machine functions and/or

processes which have been implemented

after the first installation of the

machine, which hasn´t been executed by

ESAB CUTTING SYTEMS are not considered

in this offer and may cause a separate

arrangement.


The customer has to provide lifting

facilities and transport equipment as

well as personal for assistance.

Before start of the retrofitting works,

the machine must be cleaned by the customer.

Should during re-installation additional

defects occur, which can not guarantee a

perfect function, then, with agreement of

the customer, the additional spare parts

and time will be especially charged.

If the installation or acceptance test has

to be extended due to customer"s reason,

each day will be charged in addition acc.

to our standard Service charges.

We reserve the right to make technical

modifications and improvements without

notification.


RETRO REPLACING BY VISION T5C 1 PCE

RETRO REPLACING BY VISION T5C(WINDOWS 10)


Retrofit to CNC-controller VISION T5c

Windows 10

Exchange of existing CNC-Controller

FOR MODERNISATION / RETROFITTING of:

VISION PC, 280B, 290, 390, 500, 501, 510, 520

(other's on request)

Basic controller VISION T5

(for up to 12 Stations)

Features of the Control

- operationing assistant 'OP Wizard'

efforts for new operators significantly

- Process Selector

- Bright, wide, touch-screen

- Monitoring of the arc voltage during plasma

cutting process enables accurate height

adjustment of torch

- Dual-Processor design separates motion

control and process control from the operator

interface.

- Additional toggle switch for raising and

lowering tools

- Advanced Easy Shape Library with

Interactive Graphical Preview features 88

shapes with optimization for lead-in/outs,

small holes, and inner contours

- Import parts from DXF / DWG files

and add optimized lead-in/out, and get the

best possible cut quality right at the control.

- DXF import specification

All existing layers and line types of the DXF

file will be imported. Solely the geometry

elements line, arc and circle are allowed for

cutting. All other geometry elements like

polygon, splines, blocks, measurements

etc. cannot be imported. Inner and outer

contours have to be closed and must not

contain double geometry elements.

Hardware Specs:

- PC Based Controller Running with integrated

18.5" "Wide-Screen" Format Colour LCD

Touch-Screen with 1366 x 768 pixels

resolution

- Two USB 2.0 Ports on front panel

- 8 Position Joystick

- Speed Potentiometer

- Standard toggle switches for lifting or

lowering tool on the machine

- Integrated Ethernet (LAN) Port

- CAN Bus I/O Controller

- Integrated Emergency-stop pushbutton

Standards :

DIN 2310-6, DIN EN 28206 (ISO 8206),

VDE 0100, DIN EN 60204-1, (VDE 0113 Part 1)

A current softwarebackup of the existing

controller is needed in case of order.

The agreed delivery period begins

with the date of receipt.

This features are available only

in connection with our modern

ESAB cutting torches,

and may not be applicable for

outdated systems.



VDU-TEXT IN GERMAN 1 PCE

Operator language German


SOFTWARE TRANSFER 1 PCE

Software transfer

Transfer of the existing software options

to the new controller as far as available.


Remark:

Older features or options might be modified

or discontinued, custom software need to be reprogrammed

(provided by the customer)


OPERATING INSTR. IN GERMAN 1 PCE

OPERATING INSTR. IN GERMAN(PAPER COPY AND CD ROM)

Operating manual

printed and on CD-ROM, in German


TECHNICAL DOCUMENTATION 1 PCE

TECHNICAL DOCUMENTATIONIN GERMAN (CD-ROM)

Technical documentation

on CD-ROM in German,

consisting of:

- part lists and assembly drawings in German

- wiring diagrams in German


TECHNICAL WORK TIME PER HOUR 20 PCE

Technical working time per hour


PRODUCTION WORK TIME PER HOUR 10 PCE

Production working time per hour


INSTALLATION EXCLUDED 1 PCE

The costs for installation and start-up are

NOT included.

===========================================

The German Industry Federation conditions

in the version as amended from time to time

also apply to installations in Germany.

Note:

- The necessary building site preparations and

services by the customer must be followed in

accordance with the ESAB guidelines

(machine installation plans).

- An overhead crane / forklift or other necessary

lifting gear including authorized operating

personnel must be supplied free of charge

by the customer if required.

- Track installation:

The welding of the track mounting plates on

the base support (IPB) is generally performed

by the customer.


PACKING LARGE 1420X760X700 1 PCE

PACKING LARGE 1420X760X700ON ONE PALETTE

ESAB standard packing "large"

on one palette, max. 1420 x 760 x 700 mm









Find more here - https://www.ucymachines.com/


Contact us at - sales@ucymachines.com

参数规格

制造商ESAB
型号UXL P EV 2000
Year2006
(使用) 状况二手的
库存编号1354