2017 Abendschön Maschinenbau

2017 Abendschön Maschinenbau

The system consists of:

Ultrasonic cutting device

Conveyor unit

control cabinet

protective elements

Technical data

Connection values

Mains connection: 3PH/N/PE

Signal link: upstream system hardware link

Emergency stop 2 channel with cross-circuit detection

Downstream system hardware link

Emergency stop 2 channel with cross-circuit detection

Power supply: 230/400VAC 50Hz

Connected load: 30kW

Control voltage: 24VDC

Circuit diagram no.: 1116

Remote maintenance: -

Please refer to the circuit diagram for further information.

Connecting the system

To power the system, 3 x 230/400V 50 Hz with a center conductor and protective conductor are required. The operator is responsible for laying and connecting the supply line to the distribution network and the system.

Dimensions of the system

Long: ca. 9060mm

Width: ca. 4000mm

Height: ca. 2900mm

Environmental conditions

The operation of the system is designed for use at an ambient temperature of greater than 0°C but a maximum of 40°C.

It is important to avoid condensation forming on the system.

7 Design and function of the machine

7.1 Functional description

The system is specially designed for integrating into a dough piece line as specified in the order. The system is programme-controlled

The functional sequences are automatically regulated and monitored by a control programme.

and monitored by a control programme.

- The dough pieces are fed automatically

- The dough pieces are cut into or through the centre of the cutting unit conveyor using ultrasonic cutting units.

• max. product dimensions lxwxh (mm)
• Diameter: 75…100 mm
• Height: 21…32 mm
• max. output per machine;
• Unfortunately not clear from the documentation.
• Possibly included in tender documents (not available to me).
• how the rolls are cut, horizontally or vertically and completely or partially.
• The cut is made horizontally.
• The cut can be made partially or completely according to the plant documentation (see also BA page 38):

Intended Use

The system is only intended for use in bakeries.

It is specially designed for integration into the dough line defined in accordance with the order.

The perfect and safe operation of the machine requires proper storage, installation and assembly as well as careful operation and maintenance.

The cutting system is used exclusively for cutting pieces of dough.

The cut is carried out using ultrasonic units into the previously defined dough pieces.

Any other use is considered improper.

Intended use requires signal connection to the dough line and machine loading with production ranges of the quality specified in the order.

The system is designed to operate at an ambient temperature of greater than 0°C but a maximum of 40°C.

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com