2011 HOWIAL Finger jointing line

Finger jointing line

The plant is from 2011 and the machines have been delivered NEW by HOWIAL.

The Cook Bolinder is a used, old but very robust machine. Some electrical

devices have been replaced.

Item Description 

01 HOWIAL - Dump unstacking SH/4t

for lifting the raw wood pile to the required working height

working height and semiautomatic separation of the wood

of the wood stack.

Both battened and unbattened stacks can be separated.

can be separated. With inclination possibility for tilting the stack of wood

up to 45°.

Tilting and lifting of the stack by electric motor drive.

drive. stack dimensions max. 1,75 x 1,75 x 6,00 m

max. stacking load 4 t

shortest lumber length 2,5 m

02 HOWIAL - lamella separation VE 1

for layer separation between tilt destacking and

and roller conveyor to the crosscut saw.

With pneumatically controlled tongues, on which the material is

marked for defects and then

and then deposited on the roller conveyor below.

the roller conveyor below.

03 HOWIAL - Assessment roller conveyor RO-1

digital wood moisture measuring, control and recording system for the

automatic recording and control of the wood moisture in the

measuring method according to the electrical resistance principle

working, plant in large switch cabinet complete with

Ink jet printer, measuring amplifier, electrode stand,

measuring electrode and measuring cable 1.5 m Control cabinet dimensions: W 600

x D 515 x H 478 mm

04 Moisture meter Gann DMT-8

digital wood moisture measuring, controlling and recording unit for the

automatic recording and control of the wood moisture in the

measuring method according to the electrical resistance principle

working, plant in large switch cabinet complete with

Ink jet printer, measuring amplifier, electrode stand,

measuring electrode and measuring cable 1.5 m Control cabinet dimensions: W 600

x D 515 x H 478 mm

05 HOWIAL crosscut saw AS-30 B

pneumatic controlled under table cross cut saw, with 2

automatic feed units for transporting and

positioning of the workpieces for automatic crosscutting.

Control of the saw by special photocell for the detection of

fluorescent line markings. Automatic

waste detection possible. Saw motor power 7,5 kW

saw blade diameter 700 mm

feed drive approx. 2 x 1,5 kW

air pressure 8 bar

feed speed max. approx. 60 m/min.

06 HOWIAL - conveyor belt for waste transport

of the cut waste, with nubbed belt and guide plates

belt width 350 mm

belt length 2000 mm long

belt speed 0,4 m/sec.

07 HOWIAL - double roller conveyor RO-2, 6 m long

including cross transport and feeding of the finger jointing

Drive via round belt, all rollers driven.

driven. Cross transport by chain conveyor. Ejection ±

moisture to the right Transport speed adjustable 100

m/min.

length of the roller conveyor approx. 6,00 m

width of rolls approx. 400 mm

diameter of rolls 112 mm

08-11 Compact finger jointing machine make Cook Bolinder

The technical data are original from Cook Bolinder:

Wood width from 75 to 245 mm

Timber thickness from 20 to 100 mm Input lengths from 1m to 6 m

Cross sections from 30 cm² to 200 cm² Pressing force from 5 to 22

to Spindle diameter 50 mm

tine profile 15/15

spindle speed approx. 6000 upm

Total electrical connected load approx. 62 kW

Machine weight approx. 9 to.

Gluing OEST comb system for PU

Modern Telemechanique SPS control. In good condition with

various accessories and frequency control as new.

08A Finger jointing cutter 1 set infeed / outfeed

For both shafts HSS, ZL 15/15 Leitz

cutting width 260 mm (20 pieces)

12 HOWIAL - Roller conveyor with destacking system

Driven roller conveyor with automatic ejector and

hydraulically driven destacking arms.

Technical data:

Working height: 920 mm

Length of roller conveyor approx. 12,000 mm

14 HOWIAL - Safety technology

consisting of safety fence incl. circuit breaker for the

complete finger jointing line.

15 Finger joint - bending testing machine BSPLT-100

Testing machine for finger joint bending test according to DIN 1052-

1/A1 and EN 385

Support distances freely adjustable according to attached dimension scale,

automatic calculation of the support distances in the software.

Fully automatic test procedure by mouse click

on the PC (PC not included in delivery). Alternatively the

can also be carried out by key operation on the front panel.

front panel.

Connection of any commercially available PC or laptop (Windows

2000/XP) via the supplied RS232 serial cable.

Pressure load cell PCE-HFG Series 0...25000 N

Plus spare parts and various accessories and possibly a

instruction and help with commissioning

Find more here - https://www.ucymachines.com/