2023 Holzher DYNESTIC 7535

2023 Holzher DYNESTIC 7535

Vraag ons om de prijs

Plaats:Neurenberg, Duitsland

Beschrijving

2023 HOLZ-HER DYNESTIC 7535 machining centre


The machine is one year old and has few operating hours



Machine frame in welded construction with ground and hardened prismatic guides for the travelling column, unit head and consoles

travelling column in gantry design

Rack and pinion drive, helical toothing, in X and Y direction,

1 x ball screw in the Z direction for precise positioning positioning

MATRIX table

Fixed, continuous machining table with grid division,

continuous grooves in the X and Y directions, groove spacing 50

mm with 25 metre sealing cord for clamping the wear plate

1 processing area with stop bars / stop

Height 30 mm, can be lowered pneumatically. 2 stop bars in the Y direction

and 1 stop in X-direction on the right (viewed from the front edge of the machine)


Remote maintenance:

Integrated network card for data transfer of control and programme data.

programme data. Data transfer takes place via high-speed Internet connection.

Prerequisite: High-speed Internet connection on the machine.

Use within the warranty period for warranty cases is free of charge.

USB connection for data backup or for direct import of machining programmes

processing programmes on the control panel.



TECHNICAL DATA

Processing dimensions 7535 10.5:

Max. Support surface on nesting table:

X = 3100 mm Y = 1560 mm

Max. Traverse paths:

X = 4695 mm Y = 2305 mm Z = 565 mm

Max. Processing height 7535/7735 Classic without pusher

(pusher)

Z = 300 mm from top edge of table (without wear plate)

Max. Max. overtravel height of the pusher over the table of the

Push/Auto/Lift versions:

Z = 250 mm from the top edge of the table (without wear plate)

Maximum programmable speed

Vector speed: 128.0 m/min

X = 80 m/min, Y = 100 m/min, Z = 25 m/min


SOFTWARE


CAMPUS V7 Plus CAD/CAM software 1 x licence incl. material removal simulation

1 software licence secured via licence plug for the machine

CAMPUS V7 PLUS, software for CNC machining centres

Consisting of:

1. CAMPUS NC-HOPS

2. CAMPUS aCADemy

3. cAMPUS MT-Manager

4. cAMPUS Workcenter

V7 PLUS =

5. cAMPUS 3D material removal simulation BetterSim

CAMPUS NC-HOPS

Graphical variant system with WOP and CAD/CAM properties for the creation of part variants with

macro technology KP

Hi-Speed USB-Device Network-Server

Allows the CAMPUS Single licence to be used on the machine

machine or an office computer in the same network.

One licence can be used in the network at a time!


CAMPUS V7 Plus CAD/CAM software 1 x licence incl.

BetterSim material removal simulation

1 x software licence secured via dongle for office or machine

machine

CAMPUS V7 PLUS, software for CNC machining centres

Consisting of:

1. CAMPUS NC-HOPS

2. CAMPUS aCADemy

3. cAMPUS MT-Manager

4. cAMPUS Workcenter

V7 PLUS =

5. cAMPUS 3D material removal simulation BetterSim

CAMPUS NC-HOPS

Graphical variant system with WOP and CAD/CAM

Features for creating part variants with macro technology

3.100,00 €

CAMPUS NESTING SOFTWARE

KP

CAMPUS V7 "BetterNest" free-form nesting software

1 pc. software licence secured via USB dongle for office or machine

machine

Free-form nesting software with:

Nesting of free-form parts possible

Import and generation of finished programmes

Mould approach and departure technology

Report and labelling

Configurable reports for overall nesting results


BOHRAGGREGAT

*

Pressure booster

Increase of the standard pressure from 6 to 8 bar

*

Drilling unit 7882, 16 spindles

Drive power 6 kW / 100 Hz

10 vertical spindles can be called up individually

L-shaped arrangement, 6 in X and 4 in Y direction, 32 mm grid

Max. Drill diameter: 35 mm

6 horizontal spindles

2 double drilling spindles in X-direction

1 double drill spindle in Y-direction

Total length of the drill: 70 mm from the screw-on end

(depending on the panel thickness)

Spindle stroke: 70 mm

Direction of rotation: Alternating clockwise / anti-clockwise rotation

Holder: M 10 thread - 11 mm fit

Without tools, without holder

*

Saw unit

Integrated sawing unit for sawing / grooving in X-direction

n(max.) 1000 - 5650 min-1 infinitely variable

Tool holder: A = max. Ø = 125 mm, I Ø = 20 mm,

B = max. 4.0 mm


Display of the operating status

by means of colour-changing LED lights in the machine hood

*

Electronic stop monitoring for all selected stop

stop bars or stop pins selected on the machine.

Safety device to prevent damage to the stops.

damage to the stops.

*

Hand-held control unit for remote control of the machine (13 m)

with the following operating functions:

> Start / stop of the machining programme

> Speed control of the processing cycles

> Reset button

> Manual feed / rapid traverse for all axes

> EMERGENCY STOP


*

Control panel with 21.5" 16:9 touchscreen

-Capacitive multi-touch screen for intuitive operation

-Continuous glass surface

-Incl. wireless QWERTY keyboard and mouse

(for CNCs with safety mats, the control panel is mobile

equipped #506 23 61)


5-axis head 7844, power: 13 kW (S6)

n(max.) = 0 - 24000 min-1 infinitely variable

cardanic; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable

Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand threaded nut

threaded nut

(for clockwise rotating tools) with collet chuck with HSK shank, ceramic ball bearing (hybrid bearing)

Tool weight max. 6 kg (incl. holder),

Milling tools: max. Ø 200 mm

Saw blades: max. Ø 350 mm with optional 7886 pick-up changer


ChipControl - Bluetooth spindle sensor to prevent spindle damage

spindle damage due to vibrations or overheating.

Signals vibrations of the spindles via an alarm on the operator terminal

spindles, e.g. caused by unbalanced tools or broken cutting edges.

occur. The sensor chip also generates a warning signal if the spindle

spindle or bearing overheating.

Perfect in combination with the viaCockpit digitalisation package

and the option of displaying these messages for prevention purposes on the viaCondition module on mobile devices.


Tool changer 7875, 14-position linear pick-up

pneumatically liftable; max. tool weight: 5 kg / tool or

60 kg when fully loaded

Can be fitted with collet chuck with HSK shank



DYNESTIC 7535 series

Enormous flexibility and maximum user-friendliness. Precision and

years of operational reliability thanks to high-quality components such as covered,

hardened and ground linear guides on all axes. Optimised, extremely rigid machine and travelling column uprights for excellent machining results. Precision ball screws for the Z-axis,

helical ground rack in X and Y direction = high-precision machining over the entire machine length.

machining over the entire machine length. Only with HOLZ-HER CNC: 10 year guarantee on all linear guides!

Control technology and operation

State-of-the-art control and drive technology with powerful direct drives on all axes.

on all axes. Extremely high acceleration values and dynamics - all axes fully interpolating.

Automation and material handling

Extensive automation components optimise the work processes of the Dynestic

Dynestic series for high material throughput. Feeding can be carried out

via a lifting table as well as via intelligent area storage with vacuum

with vacuum lifters. Of course, HOLZ-HER also offers

software solutions for full integration into the operating process.

Milling and drilling units

High-torque routing units with excellent performance curves and extremely smooth running

smooth running transform their creativity into products with the highest

processing quality. The drilling unit is designed for short cycle times and for short cycle times and varied machining operations.

Machine table and tool changer

Precisely milled "high-flow vacuum table" for efficient and secure holding of workpieces.

of the workpieces. The stop pins are anodised and guided in hardened and adjustable eccentric

adjustable eccentric bushes for permanently accurate zero points. Fixed

changers and optional travelling tool changers ensure short tool change times.

short tool changing times. Pneumatically controlled cover of the HSK tool holders

as protection against contamination.

Units and tool technology

High-quality changing units from the accessories price list complement the CNC machine

and offer the user even more flexibility and reduced machining times.

Accessories and maintenance

HOLZ-HER machining centres can be configured from the respective modular system for

HOLZ-HER machining centres can be configured for a wide range of material and customer requirements. The extensive range of accessories also includes, for example, a variety of helpful and and tried-and-tested clamping devices for all areas of application.


Find more here - https://www.ucymachines.com/


Contact us at - sales@ucymachines.com

Specificaties

FabrikantHolzher
ModelDYNESTIC 7535
Jaar2023
ConditieGebruikt
Voorraad nummer1146