2015 Laem System VIS100-800

2015 Laem System VIS100-800

1. General Characteristics

The VIS Machine is designed to correct alignment errors and remove defective spans from finished reels of APET sheets. The machine is bidirectional, allowing the web to run through the machine in either direction: during the first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with the help of a splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed.

The splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials.

2. Web materials to be handled

- The doctoring machine can unwind, process and rewind APET/PE materials

The thickness range to be considered is 50 – 600 μm

3. Machine

Maximum material width: 800 mm

Maximum outer diameter unwinding/rewinding: 1000 mm

Diameter cores unwinding/rewinding: 3” / 6”

Maximum mechanical speed: 600 m/min

Unwind & Rewind Tension range: 25-250 N

Taper Tension: From 100% to 50% of the set tension

Web direction: Bidirectional

Electric power supply, drive: CA 400V – 50HZ

Electronic power supply, service voltage: 12 kW

Electronic components: Siemens

Min. Pressure of compressed air supply: 6 bar

Consumption of compressed air, humidity-free: 70 l/hr

Noise level Lp(A): < 80 Db(A)

Safety standard: DM 2006/42 CE

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com