2018 ELHA DEPO XPERT K 1212

ELHA machining center

- The operating hours amount to 30,350 hours.

Regarding the operating hours, it must be mentioned that due to the discontinuation of the last article run on the centre, it has not been used for production since the beginning of 2021.

Due to a transport system that is currently still connected to the machining centre in terms of control technology, the machining centre could not be disconnected from the power supply, so it had to remain switched on and the operating hours increased despite the fact that production was no longer taking place.

The effective operating hours of the machining centre during which production took place on the centre are therefore just under 11,500 to 12,000 hours.

Manufacturer: ELHA

Designation: Horizontal BAZ

Machine type: DEPO XPERT K 1212

Year of construction: 2018

Machine hours: 27405.1 h // (of which 12892.8 h in use)

Mass of the system: 44500 kg

Mass of the largest unit

for transportation: 32000 kg

Power supply: V AC 400 V DC 24

Connected load: 135 kVA

Fuse protection: 250 A

Travel distances (X-Y-Z): 500-1200-1000 mm

Max. travel speeds (X-Y-Z): 20-30-30 m/min

Max. acceleration (X-Y-Z): 2.5-3-3 m/s²

Feed force (X-Y-Z): 25000-20000-20000 N

Weight compensation for

support of the Y-axis: 2x32 liters

Measuring systems: direct & absolute

CNC control: MTX Indra Drive (Bosch)

Remote diagnosis: Host for MMC

Safety circuit: SafeLogic

Machine panel: MBT

Manual control units: HBM-111711

Central lubrication table: 1.5 liters

Central lubrication machine: 6 liters

Hydraulic table: 15 liters

Hydraulic machine: 1000 liters

Cooling: 75 liters

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com